AquaMotion introduces the NEW Aqua-Flash™ (Patent pending) Recirculation product group. This all bronze recirculation By-pass valve installs under the sink in minutes. It does not require electricity or batteries. The pump with built-in timer installs on top of the Water heater.
This system delivers instant Hot Water Comfort, prevents the waste of energy loaded tempered water down the drain and saves the home owner on utility bills. The Aqua-Flash ON-CALL™ is owner operated and equipped with a wireless Call Button that sends a signal to a receiver to turn on the pump. This most energy efficient kit meets New Building Codes including Title 24 in California.
This product line is an AquaMotion design, built and tested in the Warwick, RI / USA facility. It is UL and NSF listed. The pumps are covered by 3 US and Canadian Patents.
Max GPM Flow: 4gpm
Max Head Feet: 8ft
Material: Stainless Steel
Connection Type: NPT
Pump Speed: Single Speed
AquaMotion designed the Model AM2, stainless steel cartridge circulators for hot or chilled fresh water circulation in open loop applications. The AM2 is ideally suited for potable water systems, hot water recirculation systems, and water source heat pumps.
With an Amp draw of only 0.26 amps the AM3 offers high performance with high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.
Features
Max GPM Flow: 7gpm
Max Head Feet: 4ft
Material: Stainless Steel
Connection Type: NPT
Pump Speed: Single Speed
With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.
Our AM3 circulator replaces Taco 003 models and other model circulators.
Max GPM Flow: 7gpm
Max Head Feet: 4ft
Material: Stainless Steel
Connection Type: Union_Half, Union
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.
Circulator comes with BICV™ built in check valve.
Our AM3 circulator replaces Taco 003 models and other model circulators.
Max GPM Flow: 7gpm
Max Head Feet: 4ft
Material: Stainless Steel
Connection Type: Union_Three_Quarter: Union 3/4" Sweat
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.
Circulator comes with BICV™ built in check valve.
Our AM3 circulator replaces Taco 003 models and other model circulators.
Max GPM Flow: 18gpm
Max Head Feet: 9ft
Material: Cast Iron
Connection Type: Flange, 2_Bolt_Flange
Pump Speed: Single Speed
With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency.
Our AM5 circulator replaces Taco 005, Grundfos, Xylem and Armstrong Pumps per Cross Reference Chart.
Max GPM Flow: 16gpm
Max Head Feet: 9ft
Material: Cast Iron
Connection Type: Flange, 2_Bolt_Flange
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency.
Circulator comes with BICV™ built in check valve.
Our AM5 circulator replaces Taco 005 and other model circulators.
Max GPM Flow: 18gpm
Max Head Feet: 9ft
Material: Stainless Steel
Connection Type: Flange, 2_Bolt_Flange
Pump Speed: Single Speed
With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.
Our AM5 circulator replaces Taco 005 and other model circulators.
Max GPM Flow: 16gpm
Max Head Feet: 9ft
Material: Stainless Steel
Connection Type: Flange, 2_Bolt_Flange
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.
Circulator comes with BICV™ built in check valve.
Our AM5 circulator replaces Taco 005 and other model circulators.
Max GPM Flow: 11gpm
Max Head Feet: 8ft
Material: Stainless Steel
Connection Type: NPT
Pump Speed: Single Speed
With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.
Our AM6 circulator replaces Taco 006 models and other model circulators.
Max GPM Flow: 11gpm
Max Head Feet: 8ft
Material: Stainless Steel
Connection Type: Union_Half, Union
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.
Circulator comes with BICV™ built in check valve.
Our AM6 circulator replaces Taco 006 models and other model circulators.
Max GPM Flow: 11gpm
Max Head Feet: 8ft
Material: Stainless Steel
Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.
Circulator comes with BICV™ built in check valve.
Our AM6 circulator replaces Taco 006 models and other model circulators.
Max GPM Flow: 20gpm
Max Head Feet: 11ft
Material: Cast Iron
Connection Type: Flange, 2_Bolt_Flange
Pump Speed: Single Speed
With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation.
Our AM7 circulator replaces Taco 007 and other model circulators.
Max GPM Flow: 17gpm
Max Head Feet: 11ft
Material: Cast Iron
Connection Type: Flange, 2_Bolt_Flange
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation.
Circulator comes with BICV™ built in check valve.
Our AM7 circulator replaces Taco 007 and other model circulators.
Max GPM Flow: 20gpm
Max Head Feet: 11ft
Material: Stainless Steel
Connection Type: Flange, 2_Bolt_Flange
Pump Speed: Single Speed
With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.
Our AM7 circulator replaces Taco 007 and other model circulators.
Max GPM Flow: 16gpm
Max Head Feet: 11ft
Material: Stainless Steel
Connection Type: Flange, 2_Bolt_Flange
Check Valve: Yes
Pump Speed: Single Speed
With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.
Circulator comes with BICV™ built in check valve.
Our AM7-S circulator replaces Taco 007 and other model circulators.
Max GPM Flow: 17gpm
Max Head Feet: 21ft
Material: Cast Iron
Connection Type: Flange, 4_Bolt_Flange
Pump Speed: Three Speed
With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.
Max GPM Flow: 16gpm
Max Head Feet: 20ft
Material: Cast Iron
Connection Type: Flange, 4_Bolt_Flange
Check Valve: Yes
Pump Speed: Three Speed
With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
Circulator comes with BICV™ built in check valve.
The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.
Max GPM Flow: 17gpm
Max Head Feet: 21ft
Material: Stainless Steel
Connection Type: Flange, 4_Bolt_Flange
Pump Speed: Three Speed
With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.
Max GPM Flow: 16gpm
Max Head Feet: 20ft
Material: Stainless Steel
Connection Type: Flange, 4_Bolt_Flange
Check Valve: Yes
Pump Speed: Three Speed
With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
Circulator comes with BICV™ built in check valve.
The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.
Max GPM Flow: 31gpm
Max Head Feet: 12ft
Material: Cast Iron
Connection Type: Flange, 4_Bolt_Flange
Pump Speed: Three Speed
With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
The AM10 circulator replaces Taco 0010 circulators and other circulator models.
Max GPM Flow: 29gpm
Max Head Feet: 12ft
Material: Cast Iron
Connection Type: Flange
Check Valve: Yes
Pump Speed: Three Speed
With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
Circulator comes with BICV™ built in check valve.
The AM10 circulator replaces Taco 0010 circulators and other circulator models.
Max GPM Flow: 31gpm
Max Head Feet: 12ft
Material: Stainless Steel
Connection Type: Flange, 4_Bolt_Flange
Pump Speed: Three Speed
With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
The AM10 circulator replaces Taco 0010 circulators and other circulator models.
Max GPM Flow: 29gpm
Max Head Feet: 12ft
Material: Stainless Steel
Connection Type: Flange, 4_Bolt_Flange
Check Valve: Yes
Pump Speed: Three Speed
With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
Circulator comes with BICV™ built in check valve.
The AM10 circulator replaces Taco 0010 circulators and other circulator models.
Max GPM Flow: 20gpm
Max Head Feet: 20ft
Material: Cast Iron
Connection Type: Flange, 4_Bolt_Flange
Check Valve: Yes
Pump Speed: Variable Speed
Corded: Yes
With an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
Circulator comes with BICV™ built in check valve.
The Einstein circulator replaces Grundfos Alpha models and other model circulators.
Max GPM Flow: 20gpm
Max Head Feet: 21ft
Material: Stainless Steel
Connection Type: Flange, 4_Bolt_Flange
Check Valve: Yes
Pump Speed: Variable Speed
Corded: Yes
With an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
Circulator comes with BICV™ built in check valve.
The Einstein circulator replaces Grundfos Alpha models and other model circulators.
Max GPM Flow: 42gpm
Max Head Feet: 40ft
Material: Cast Iron
Connection Type: Flange, 2_Bolt_Flange
Check Valve: Yes
Pump Speed: Variable Speed
Corded: Yes
With an Amp draw of only 0.02 to 0.55 amps, and watt consumption of just 5-127 watts the Newton is the most energy efficient ECM on the market. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.
Circulator comes with Optional BICV™ built in check valve.
Material: Cast Iron
Connection Type: Flange
Check Valve: Yes
Pump Speed: Single Speed
TwinTurbo Cast Iron or Stainless Steel: 2 AMR or 2 AM10 Pumps wired together set on medium or high speed.
Benefits and features:
AMR-F3, TwinTurbo Cast Iron, HeadFt:41 GPM:17
AMR-FV3, TwinTurbo Cast Iron with check valve, HeadFt:41 GPM:16
AMR-F2, TwinTurbo Cast Iron, HeadFt:36 GPM:14
AMR-FV2, TwinTurbo Cast Iron with check valve, HeadFt:36 GPM:13
AM10-F3, TwinTurbo Cast Iron HeadFt:24 GPM:29
AM10-FV3, TwinTurbo Cast Iron with check valve HeadFt:24 GPM:28
AM10-F2, TwinTurbo Cast Iron, HeadFt:21 GPM:24
AM10-FV2, TwinTurbo Cast Iron with check valve, HeadFt:21 GPM:23
Material: Stainless Steel
Connection Type: Flange, 4_Bolt_Flange
Pump Speed: Single Speed
TwinTurbo Cast Iron or Stainless Steel: 2 AMR or 2 AM10 Pumps wired together set on medium or high speed.
Benefits and features:
AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17
AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16
AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14
AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13
AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29
AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28
AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24
AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23
Material: Stainless Steel
Check Valve: Yes
Pump Speed: Single Speed
Corded: Yes
AQUA-FLASH™ for hot water tanks: AMH1K-3UV
Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, line cord, bronze by-pass valve (with check valve), 12” NSF hose & Tee
Material: Stainless Steel
Check Valve: Yes
Pump Speed: Single Speed
Corded: Yes
AQUA-FLASH™ for tankless heater: AMH1K-6UVZT1
Material: Stainless Steel
Check Valve: Yes
Pump Speed: Single Speed
Corded: Yes
AMH1K-1 is designed for standard plumbing systems with hot water pipe length under 100ft.
Material: Stainless Steel
Check Valve: Yes
Pump Speed: Single Speed
Corded: Yes
AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft.
Material: Stainless Steel
Check Valve: Yes
Pump Speed: Three Speed
Corded: Yes
AMH3K-R is designed for standard plumbing systems with hot water pipe length up to 600ft.
Material: Stainless Steel
Check Valve: Yes
Pump Speed: Single Speed
Corded: Yes
AMH2K-7 is designed for dedicated return line systems with standard water heater.
Material: Stainless Steel
Connection Type: Flange
Check Valve: Yes
Pump Speed: Three Speed
Corded: Yes
AMH2K-R is designed for dedicated return line systems with tankless water heater.
On-Call Wireless Control Kit – Wireless Button and Receiver
(Button available separately AMK-WBR)
On-Call Wireless Control Kit – Motion Sensor and Receiver
(Motion Sensor available separately AMK-MSR)
On-Call Air Actuated Counter Control Kit – Wireless Button and Receiver
(Button available separately AMK-CBW)
Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged
3/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
1″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
1-1/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
1-1/2″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
3/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
1″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
1-1/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
1-1/2″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.
3/4″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel
Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.
1″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel
Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.
1-1/4″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel
Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.
3/4″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel
Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.
1″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel
Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.
1-1/4″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel
Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.
Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost