AquaMotion cast iron circulators are rugged wet motor cartridge type circulators designed for closed loop hydronic heating systems, radiant heating, and indirect water heating applications. The wet motor design allows super quiet, single stage, in-line, and maintenance-free performance.
All cast iron and stainless PSC pumps are covered by 7 US and 2 Canadian Patents for their unique replaceable and flushable cartridge design and the patented long life bearing design.
All pumps are available with a line cord. Add “L” to the end of the product number for the line cord version.
AquaMotionSMART systems operate at 10-33% less power consumption than the leading competitors. Lowest energy consumption means greater savings on energy costs. The Einstein’s unique Night Set Back feature automatically lowers its output at night to conserve energy.
Lowest Power Consumption, Advanced Technology
These pumps represent the latest innovation in electronically commutated motors (ECM circulator technology). They use a permanent magnet motor design and variable speed technology to adapt automatically to system demand. Infinitely variable speeds means optimized system performance while drawing the least amount of energy possible.
AquaMotion stainless steel circulators are rugged wet motor cartridge circulators for open loop domestic, solar, hot water recirculation and potable water systems. The wet motor design allows super quiet, single stage, in-line, and maintenance-free performance.
AquaMotion’s Stainless Steel Circulators has been designed for Residential and commercial systems such as:
All stainless PSC pumps are covered by 7 US and 2 Canadian Patents for their unique replaceable and flushable cartridge design and the patented long life bearing designs.
All pumps are available with a 10ft line cord. Add “L” to the end of the product number for the line cord version.
Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation.
Replacement cartridges, stainless, bronze and cast iron companion flanges, and isolation (shut-off) flanges as well as other accessories are available.
AquaMotion products are available at local plumbing and heating wholesalers and online retailers.
The Problem: How long do you wait for hot water? 30 seconds, 1 minute, longer?
The Solution: Install an AquaMotion recirculation system. Systems are available for hot water tanks or tankless plumbing.
The Benefits: Save Time, Save Hot Water, Save Energy, Save Money
A pump at the tank or tankless heater, or installed under the sink, forces the lukewarm water from the hot supply line into the cold supply line. If a dedicated return line is used it returns the lukewarm water to the heater. An ON DEMAND button/motion sensor or app can also activate the system and increase savings even more.
—
AquaMotion welcomes OEM inquires. Contact us to discuss your needs today.
AquaMotion products are available at local plumbing and heating wholesalers and online retailers.
Alabama, —– A.H. Deveney, www.ahdeveney.com. 800-338-3639. sales@ahdeveney.com.
Alaska, AK —- United Sales NW, LLC, 800-275-3011, www.unitedsalesnw.com.
Arizona, Phoenix, AZ —– R & G Sales, 602-232-2345, www.r-gsales.com.
Arkansas, —– A.H. Deveney, www.ahdeveney.com. 800-338-3639. sales@ahdeveney.com.
California, Northern CA: Livermore, CA —– Harcro Sales, LTD , 510-786-2480, orders@harcrosales.com.
California, Southern CA, Ontario, CA —- Specification Sales Inc., 909-594-7088, info@specsales.com.
Colorado, Centennial, CO —– Contact Rich Gruber, NSM, 401-486-3900, rich@AquaMotionHVAC.com.
Connecticut, CT —– Dyson Associates, 860-828-5863, www.dysonassoc.com.
Delaware, —– Associated Marketing, 800-468-0801, frtank@associatedmarketing.net.
Florida, —– Marsh & Moore, Inc., www.marshmoore.com. 800-821-9936, jdorsey@marshmoore.com.
Georgia, Marrieta, Georgia —– W.R. Bristow, 770-952-3548, warehouse@wrbristow.com.
Hawaii, Honolulu, HI —– Specification Sales Inc., 909-923-5420, info@specsales.com.
Idaho, Northern ID —– United Sales NW, LLC, 360-524-6040, info@unitedsalesnw.com.
Idaho, Southern ID —– Contact Rich Gruber, NSM, 401-486-3900, rich@AquaMotionHVAC.com.
Illinois, IL —– H.O.K. Sales, Inc., 800-323-4498, lnolan@hoksales.com.
Indiana, IN —– Ashworth Train & Associates, 317-722-1950, sales@ashworthtrain.com.
Iowa, IA —– Moore Sales Corporation, 812-882-4037, www.mooresalescorp.com. sales@mooresalescorp.com.
Kentucky, KY —– G3 Clean Energy Marketing, LLC, 724-392-4548 , Tomg@G3Cleanenergy.com.
Kansas, KS —– Moore Sales Corporation, 812-882-4037, www.mooresalescorp.com. sales@mooresalescorp.com
Louisiana, LA —– A.H. Deveney, 800-338-3639, www.ahdeveney.com. sales@ahdeveney.com.
Maine, ME —– Dyson Associates, 860-828-5863, www.dysonassoc.com.
Maryland, MD —– Weed-Studnicky Associates, 410-530-2351, robweed.studnicky@comcast.net.
Massachusetts, MA —– Dyson Associates, 860-828-5863, www.dysonassoc.com.
Michigan, MI —– Howley Agency Sales Company, 616-785-9000, mjohnson@dsshowley.com.
Minnesota, MN—– Moore Sales Corporation, 812-882-4037, lonniemoore@mooresalescorp.com
Mississippi, MS —– A.H. Deveney, 800-338-3639, www.ahdeveney.com. sales@ahdeveney.com.
Missouri, MO—– Moore Sales Corporation, 812-882-4037, www.mooresalescorp.com. sales@mooresalescorp.com.
Montana, MT —– Contact Rich Gruber, NSM, 401-486-3900, rich@AquaMotionHVAC.com.
Nebraska, NE —– Moore Sales Corporation, 866-274-8082, www.mooresalescorp.com. sales@mooresalescorp.com.
Nevada, Northern NV —– Harcro Sales, LTD , 510-786-2480, orders@harcrosales.com.
Nevada, Southern Nevada —– Specification Sales Inc., 909-923-5420, info@specsales.com.
New Hampshire, New Hampshire —– Dyson Associates, 860-828-5863, www.dysonassoc.com.
New Jersey, Southern NJ —– Associated Marketing, 800-468-0801, frank@associatedmarketing.net.
New Jersey, Northern NJ —– Platsky HVAC, 516-333-9292, www.platsky.com. info@platsky.com.
New Mexico, NM —– Contact Rich Gruber, 401-486-3900, rich@AquaMotionHVAC.com.
New York, Upstate NY: Fairport, NY —– Northeast Sales Associates, 585-223-5982, ssabin@nesasales.com.
New York, NYC Area: Westbury, NY —– Platsky HVAC, 516-333-9292 , info@platsky.com.
North Carolina, Wilmington, NC —– WB Marketing Group, 704-301-2815, mike.f@wba-inc.com.
North Dakota, ND —– Moore Sales Corporation, 812882-4037, lonniemoore@mooresalescorp.com.
Ohio, OH —– G3 Clean Energy Marketing, LLC, 724-392-4548 , Tomg@G3Cleanenergy.com.
Oklahoma, OK —– Tipton Company, 214-636-3005, Don@TiptonCompany.com.
Oregon, Portland, OR —– United Sales NW, LLC, 360-524-6040, info@unitedsalesnw.com.
Pennsylvania, Eastern, PA —– Associated Marketing, 800-468-0801, frank@associatedmarketing.net.
Pennsylvania, Western, PA —– G3 Clean Energy Marketing LLC:, 724-392-4548, tomg@g3cleanenergy.com.
Rhode Island, Rhode Island —– Dyson Associates, 860-828-5863, www.dysonassoc.com.
South Carolina, SC —– WB Marketing Group, 704-301-2815, mike.f@wba-inc.com.
South Dakota, SD —– Moore Sales Corporation, 812-882-4037, lonniemoore@mooresalescorp.com.
Tennessee, TN Eastern—–W.R. Bristow, 770-952-3548, warehouse@wrbristow.com.
Tennessee, TN Central, Western, A.H. Deveny, 800-338-3639, www.ahdeveney.com, sales@ahdeveney.com
Texas, Houston, TX —– Tipton Company, 713-225-1086, Olga@TiptonCompany.com.
Utah, Utah —– Contact Rich Gruber, NSM, 401-486-3900, rich@AquaMotionHVAC.com.
Vermont, VT, —–Dyson Associates, 860-828-5863, www.dysonassoc.com.
Virginia, VA —– Weed-Studnicky Associates, 410-530-2351, robweed.studnicky@comcast.net.
Washington, Vancouver, WA —– United Sales NW, LLC, 360-524-6040, info@unitedsalesnw.com.
Washington DC, Washington DC —– Weed-Studnicky Associates, 410-530-2351, robweed.studnicky@comcast.net.
West Virginia, West VA —– G3 Clean Energy Marketing, LLC, 724-392-4548 , Tomg@G3Cleanenergy.com.
Wisconsin, WI —– Moore Sales Corporation, 812-882-4037, lonniemoore@mooresalescorp.com.
Wyoming, WY —– Contact Rich Gruber, NSM, 401-486-3900, rich@AquaMotionHVAC.com.
Canada, Manitoba, Saskatchewan, Ram Mechanical Marketing, 306-244-6622, curtis@rammarketing.ca, www.rammarketing.ca.
Canada, British Columbia, Alberta, Ontario, Quebec, Newfoundland, Prince Edward I., Northwest Territories. Contact Hans Kuster, 401-785-3000, hans@AquaMotionHVAC.com.
Puerto Rico, —- Inter American Builders Agencies, 787-757-0200, www.iabaco.com. ricardoj@iabaco.com
Dominican Republic, DR —– Inter American Builders Agencies Co. Inc., 787-752-0200, www.iabaco.com. ricardoj@iabaco.com.
Virgin Islands, Virgin Islands —– Inter American Builders Agencies Co. Inc., 787-752-0200, www.iabaco.com. ricardoj@iabaco.com.
January 31, 2017, AquaMotion was awarded Canadian Patent, No. 2,883,495 for their unique pump design with flushable and replaceable cartridge and with carbon infused sintered bearings for longer life. This is a green design and can double the life of the pump with a low priced replacement cartridge. The innovative design in sustainable and cost effective. The pumps also feature lowest power draw and energy savings.
AquaMotion is represented in all of Canada by: Ontor Ltd, 12 Leswyn Road, Toronto, M6A 1K3, Canada – Tel: 416-781-5286, http://www.ontor.com.
Hot Water with Recirculation Systems offer the comfort and savings of Instant Hot Water with Recirculation.
The Problem: How long do you wait for hot water when you turn on the faucet? 30 seconds, 1 minute, 2 or 3 minutes, longer? While you wait, a home with 5 taps can waste up to 15,000 gallons of tempered water down the drain. You pay for this potable water, wasted energy and sewage fees. A hot water recirculation system can help!
The Solution: When you install a proven, award winning AquaMotion hot water recirculation system you get a variety of benefits including hot water comfort at every faucet. No more waiting, save thousands of gallons of water a year! There is a system is available for every type of installation, hot water tanks or tankless, indoor or outdoor, on demand, dedicated return line or single line system. Read more about Hot Water Recirculation.
The Benefits: With a hot water recirculation system, you get hot water comfort at every faucet, you save time with “no more waiting” hot water and you save lots of water! You can save 12,000 – 15,000 gallons of water per year, so you save energy, utility and sewer bills, you save money. Save energy with a timer system and save even more with an “ON DEMAND” System. You can go green and help conserve the precious water resource. An AquaMotion Hot Water Recirculation system can also meet your local plumbing codes.
The Cost: To run the circulator with timer at $0.12 per kw is approx. $3.00, $8.00 for the large pump annually. Our hot water recirculation kits have an approx. one to three year payback depending on the size of the installation.
The AquaMotion product line include single speed, three speed PSC (Permanent Split Capacitor) and variable speed ECM (Electronically Commutated) pumps in cast iron and stainless steel, booster pumps that boost domestic water pressure by 30 psi to all fixtures, and instant hot water recirculation systems. We also have eco-cartridges and flange products available.
AquaMotion pumps are assembled and tested 100% in our Warwick, RI, USA plant and is covered by nine US patents and two Canadian. All pumps are UL, ULC, or ETL and NSF listed and covered by a 3-year limited warranty on circulators and 1-year for booster pumps, bypass valves, and accessories. AquaMotion products are sold through Heating and Plumbing Wholesalers and online retailers.
AquaMotion’s innovative design created a pump line with the lowest power consumption. This is based on actual amp draw comparisons with published Underwriters Laboratories data of comparable PSC motor or ECM pumps on the market. The PSC design features the only field replaceable and field flushable Green ECO-CARTRIDGE™. This cartridge is the heart of every circulator and contains all moving parts. The design allows for replacement of the cartridge or by pulling it apart and flushing it and reinstalling it. This is a tremendous advantage in areas of hard water. The design prevents black iron oxide and contaminants from entering into the cartridge. The flushable cartridge extends the life of the pumps and makes them a sustainable product that can double its operating life.
AquaMotion was created with the vision of designing the most energy efficient, high performance, sustainable circulator line on the market with more benefits and features to meet and exceed customer demands and to compete with the world and US market leaders.
AquaMotion was incorporated in 2002 by Hans Kuster. The Company developed the revolutionary Green ECO-Cartridge™ design which is the heart of every circulator and contains all moving parts. It has the only field replaceable and field serviceable cartridge on the market. Competitive manufacturers have to replace their entire cartridge or pump, increasing the foot print on the environment and doubling the cost to the consumer. The cartridge design and long life bearings are patented. The design also prevents black iron oxide and contaminants from entering into the cartridge. This PSC pump line offers the lowest power consumption of any PSC motor and the lowest power consumption of any ECM pump.
How did we do it? With the help of the most experienced engineers in the water lubricated pump field. Benno Lebkuchner, formerly Senior VP of Engineering at the market leader in wet rotor circulators joined him at Sparco and then at AquaMotion. Benno and Hans, using their lifetime experience in the hydronic industry began designing the most reliable and energy efficient PSC circulator line.
Michael McNamara joined AquaMotion in 2013 as Director of Engineering. McNamara previously worked as Director of Engineering at Grundfos, Pentair and as VP of Engineering at Taco. McNamara brings experience from these top industry companies. At AquaMotion he designed many new products, ECM, electronically controlled motor circulators and hot water recirculation valves and systems which keep AquaMotion in front as technology leader in pumps and hot water recirculation systems, including the first outdoor hydronic pump system for tank-less heaters.
Hans Kuster previously was Senior VP at the US market leader in circulators for 21 years. He founded Sparco Inc. of Warwick RI, in 1983, Sparco developed 18 U.S and foreign patents for their products. Sparco became a leading manufacturer of hydronic heating and energy products. They included radiant manifolds, zone valves and the AquaMix proportional water mixing valves. Sparco brand-named his products for the world leader in radiant floor heating, Wirsbo/Uponor, Zurn, Kohler and Grundfos. Hans sold Sparco to Honeywell International in 2000.