The MAIN 6 Sections

Cartridges and Flanges

Revolutionary Replacement Pump Cartridge

There is tremendous waste going on in our industry!

Perfectly good pumps that stop working because of calcium build up or dirt in the system end up in the land fill.

cartridge-expandedThere is a better solution for this problem.  AquaMotion invented a revolutionary Green ECO Cartridge™.  The cartridge, which is the heart of the pump, can be pulled out of the stator, taken apart and flushed to remove calcium deposits or dirt.  This cartridge can then be reinstalled to extend the life of the pump for many more years.  This saves the contractor and homeowner substantial money and does not increase the footprint on the environment.  A new stainless pump costs several hundred dollars.  The cartridge costs the homeowner or service company $50-$60.

This is what we call sustainable.  Instead of filling the land fill, we recycle.

Only AquaMotion PSC pumps have this patented invention built in.  The strong, single piece, patented carbon infused bearings in the cartridge provide longer life and ultra-quiet service.

All AquaMotion Replacement Cartridges are interchangeable with Cast Iron and Stainless Steel Pumps. 

CT03, for the AM3 circulator

CT56, for the AM5 and AM6 circulators

CT07, fits the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost.

CT10, fits the AM10 3 speed circulator

CTR, fits the AMR 3 speed circulator

Stainless, Bronze and Cast Iron Companion Flanges

Better Prices, Better Quality

  • Includes 2 square gaskets for best seal with AquaMotion® and Taco® pumps
  • For all other manufacturer’s pumps, use this kit with recommended gaskets
  • Cast iron flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench.
  • All kits include 2 flanges, 2 gaskets, 4 screws, 4 bolts (TWO Flanges per unit)

 

*Flanges have female threads except for FK75S-M* which has a male thread

Isolation (Shut-off) Flanges

  • Forged brass body full port for water application
  • 600 PSI Non-Shock WOG
  • Packing gland and O-ring on stem for a reliable seal
  • Heavy duty rust resistant handle with grip
  • Solder ends comply with ANSI B16.18
  • Thread ends comply with ANSI B1.20.1
  • -20ºC to 65ºC (-4ºF to 149ºF). temperature range
  • Allows draining of the non-pressure side of the valve when closed

Aqua-Max™ Boost

Boost domestic water pressure by 30 psi to all fixtures and sprinkler heads.

Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation.

Recirculation Systems

Install an AquaMotionHot™ Hot Water Recirculation System!

Enjoy the COMFORT of INSTANT HOT WATER, WATER and ENERGY SAVINGS. Works on tank and tankless systems.

PATENTED: US 9,863,647 B1, D 834,145 S & 10,612,793

12 3 4 Award-2


THE PROBLEM: How long do you wait for hot water arrives in the shower? 30 Seconds, 1 minute, 2 minutes? While you wait, a family of 5 wastes approx.15000 gallons of tempered water down the drain and pays for that water plus sewage fees.

THE SOLUTION: AquaMotion has the SOLUTION for every possible installation in homes, condos, multi-family, mansions, businesses, restaurants and factories. Our products offer the simplest, uncomplicated, most cost-effective solutions for any type of installation. Our prices are more competitive and our products are patented and built in the USA.

THE BENEFITS: By providing instant hot water there’s no more waiting for hot water. Prevents the dumping of energy loaded warm water down the drain reducing sewage fees as well as the water bill. Meets building codes for water saving and helps to alleviate water shortages. All our products are GREEN and are friendly to the environment.


SAVE UP TO 15,000 GALLONS OF WATER PER YEAR!*

SAVE ON WATER & SEWER BILLS!

ENJOY INSTANT HOT WATER AT EVERY FIXTURE IN YOUR HOME!

Heat Source

We recommend different models for tank and tankless systems based on the requirements of the tankless heater operating needs or the length and size of pipe runs.

Call us for help with installation questions. 401 785 3000

Check out our Recirculation Selection Charts Here: 

Recirculation Selection Chart

Aqua-Shield™ for Outdoor Tankless Recirculation Selection Chart

Mode of Operation

AquaMotionHot™ One and AquaMotionHot™ Two are fully automatic systems that are controlled by built-in sensors and switches. When water at the faucet cools down, the sensor turns on the pump and shuts it off when hot water arrives. Pump runs, depending on the length and size of the pipe, three to four times an hour for one or two minutes to maintain instant hot water at the faucet.

Separate plug-in timers or built-in timers on the pumps are available to limit the operating time to save energy when hot water is not needed.

Operating Cost

AquaMotion offers the most energy efficient circulators. Annual electricity cost to operate the pump are minimal, from $2.00 per year to approx. $8.00 for the largest system.

Type of installation and Model Selection

Homes built before 1980 and many later homes use a single pipe (one pipe or point of use) system to deliver hot water to the sinks and showers. The water in the pipe turns cold when no one uses hot water. For this type of application, use any of our AquaMotionHOT™ One Kits. They are installed under the sink furthest from the heat source.

Homes that have a dedicated return line, (2 pipe) systems where a pipe goes from the furthest sink from the heat source back to the hot water tank or boiler or tank-less heater. Use an AquaMotionHOT™ Two kit.

AquaMotionHot™ On-Demand

All systems can be made ON DEMAND Systems to meet certain codes or preferences by adding ON DEMAND buttons and wireless receivers or motion sensors with receiver kits.

California and some other States require an operator controlled system where the user presses a CALL button to turn on the pump. Motion sensor are another method used to start the pump. AquaMotion offers both these solutions with our ON DEMAND Systems. Up to 5 wireless buttons or 5 motion sensors or mixed 5 can be programmed into one receiver.

ECM Circulators

Aquamotion SMART™ Variable Speed ECM Pumps

Lowest Power Consumption

AquaMotionSMART systems operate at 10-33% less power consumption than the leading competitors. Lowest energy consumption means greater savings on energy costs. The Einstein’s unique Night Set Back feature automatically lowers its output at night to conserve energy.

Advanced Technology

These pumps represent the latest innovation in electronically commutated motors (ECM circulator technology). They use a permanent magnet motor design and variable speed technology to adapt automatically to system demand. Infinitely variable speeds means optimized system performance while drawing the least amount of energy possible.

High Efficiency

Lower power consumption than competitor’s results in lower operating cost. The unique night set back feature automatically lowers its output at night to conserve more energy.

Ease of Operation

Easy single button speed control with LED speed and Watt draw display. Automatic night set back feature saves money while you sleep. Line cord with cord connector for boiler control included.

Innovative Cartridge Design

Replaceable cartridge extends the life of the pump for a fraction of the cost of a new pump. It promotes sustainability in a green environment.

Super Quiet Operation

US Built and Tested

Cross Reference Chart

Stainless Steel Circulators

Stainless Steel Circulators

AquaMotion stainless steel circulators are rugged wet motor cartridge circulators for open loop domestic, solar, hot water recirculation and potable water systems. The wet motor design allows super quiet, single stage, in-line, and maintenance-free performance.AMR-S3F1

Features

  • Easy to install and service
  • Covers the entire Performance Range with the fewest number of circulators
  • Super quiet operation, compact size, self venting
  • Optional BICV Built-In Check Valve prevents thermo siphoning and back flow
  • Maintenance free and field serviceable cartridge
  • UL and ULC for Canada listed
  • Compliance with California and Vermont standards for lead free bronze
  • Industry leading three year warranty
  • Rugged single and three speed models with low Amp draw
  • NSF/ANSI 372 listed

AquaMotion’s Stainless Steel Circulators has been designed for Residential and commercial systems such as:

  • Indirect domestic water systems
  • Domestic re-circulating systems
  • Open heating systems (Wood boilers)
  • Water transfer
  • Water filtration
  • Water Source heat pumps
  • Solar heating applications
  • Call factory for more information

All stainless PSC pumps are covered by 7 US and 2 Canadian Patents for their unique replaceable and flushable cartridge design and the patented long life bearing designs.

All pumps are available with a 10ft line cord. Add “L” to the end of the product number for the line cord version. 
Cross Reference Chart

Cast Iron Circulators

Cast Iron Circulators

AquaMotion cast iron circulators are rugged wet motor cartridge type circulators designed for closed loop hydronic heating systems, radiant heating, and indirect water heating applications. The wet motor design allows super quiet, single stage, in-line, and maintenance-free performance.

Features

  • Easy to install and service
  • Covers the entire Performance Range with the fewest number of circulators
  • Super quiet operation, compact size, self venting
  • Optional BICV, Built-In Check Valve prevents thermo siphoning and back flow
  • Maintenance free and field serviceable cartridge
  • UL and ULC for Canada listed
  • Compliance with California and Vermont standards for lead free bronze
  • Industry leading three year warranty
  • Rugged single and three speed models with lowest Amp draw

AquaMotion’s Cast Iron Circulators has been designed for Residential and commercial systems such as:

  • Hydronic heating systems (Hot water heating)
  • Radiant floor and panel heating
  • Heat recovery systems
  • Chilled water cooling systems
  • Water Source Heat pump systems
  • Solar heating applications
  • Contact factory for more applications

All cast iron and stainless PSC pumps are covered by 7 US and 2 Canadian Patents for their unique replaceable and flushable cartridge design and the patented long life bearing design.

All pumps are available with a line cord. Add “L” to the end of the product number for the line cord version. 

Cross Reference Chart