hot3The AquaMotionHot On-Call™ recirculation system delivers user controlled hot water when you want it. The On-Call system allows homeowners to choose between a wireless control button, an air-powered button that meets code for through counter installation, and a motion sensor to deliver hot water to their point of use. These user controlled features allows homeowners to save up to 15,000 gallons a year in wasted water with operating costs as low as $2.00 – $3.00 annually.

Max GPM Flow: 5gpm

Max Head Feet: 10ft

Material: Stainless Steel

Connection Type: NPT

Pump Speed: Single Speed

AM1 Stainless 3/4″ NPT (Replaces AM2)


Max GPM Flow: 7gpm

Max Head Feet: 4ft

Material: Stainless Steel

Connection Type: NPT

Pump Speed: Single Speed

With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

Our AM3 circulator replaces Taco 003 models and other model circulators.

 


Max GPM Flow: 7gpm

Max Head Feet: 4ft

Material: Stainless Steel

Connection Type: NPT

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ With  an Amp draw of only 0.46 amps the AM3  3/4″ NPT offers high performance and high efficiency. All stainless steel models are fully lead free.

Circulator comes with Line Cord and Timer.

Our AM3 circulator replaces Taco 003 models and other model circulators.


Max GPM Flow: 7gpm

Max Head Feet: 4ft

Material: Stainless Steel

Connection Type: Union_Half, Union

Check Valve: Yes

Pump Speed: Single Speed

With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

Circulator comes with BICV™ built in check valve.

Our AM3 circulator replaces Taco 003 models and other model circulators.

 


Max GPM Flow: 18gpm

Max Head Feet: 9ft

Material: Cast Iron

Connection Type: Flange, 2_Bolt_Flange

Pump Speed: Single Speed

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency.

Our AM5 circulator replaces Taco 005, Grundfos, Xylem and Armstrong Pumps per Cross Reference Chart.


Max GPM Flow: 7gpm

Max Head Feet: 4ft

Material: Stainless Steel

Connection Type: Union_Half

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ Stainless AM3 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer


Max GPM Flow: 16gpm

Max Head Feet: 9ft

Material: Cast Iron

Connection Type: Flange, 2_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency.

Circulator comes with BICV™ built in check valve.

Our AM5 circulator replaces Taco 005 and other model circulators.


Max GPM Flow: 7gpm

Max Head Feet: 4ft

Material: Stainless Steel

Connection Type: Union_Three_Quarter: Union 3/4" Sweat

Check Valve: Yes

Pump Speed: Single Speed

With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

Circulator comes with BICV™ built in check valve.

Our AM3 circulator replaces Taco 003 models and other model circulators.

 


Max GPM Flow: 7gpm

Max Head Feet: 4ft

Material: Stainless Steel

Connection Type: Union_Three_Quarter: Union 3/4" Sweat

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ Stainless AM3 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer


Max GPM Flow: 18gpm

Max Head Feet: 9ft

Material: Stainless Steel

Connection Type: Flange, 2_Bolt_Flange

Pump Speed: Single Speed

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.

Our AM5 circulator replaces Taco 005 and other model circulators.

 


Max GPM Flow: 16gpm

Max Head Feet: 9ft

Material: Stainless Steel

Connection Type: Flange, 2_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.

Circulator comes with BICV™ built in check valve.

Our AM5 circulator replaces Taco 005 and other model circulators.

 


Max GPM Flow: 11gpm

Max Head Feet: 8ft

Material: Stainless Steel

Connection Type: NPT

Pump Speed: Single Speed

With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

Our AM6 circulator replaces Taco 006 models and other model circulators.

 


Max GPM Flow: 11gpm

Max Head Feet: 8ft

Connection Type: NPT

Pump Speed: Single Speed

Aqua-Ready™ Stainless AM6 with 3/4″ NPT includes Line Cord and Timer.


Max GPM Flow: 20gpm

Max Head Feet: 11ft

Material: Cast Iron

Connection Type: Flange, 2_Bolt_Flange

Pump Speed: Single Speed

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation.

Our AM7 circulator replaces Taco 007 and other model circulators.


Max GPM Flow: 11gpm

Max Head Feet: 8ft

Material: Stainless Steel

Connection Type: Union_Half, Union

Check Valve: Yes

Pump Speed: Single Speed

With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

Circulator comes with BICVbuilt in check valve.

Our AM6 circulator replaces Taco 006 models and other model circulators.

 


Max GPM Flow: 17gpm

Max Head Feet: 11ft

Material: Cast Iron

Connection Type: Flange, 2_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-FV1 uses standard 2-bolt circulator flanges for easy installation.

Circulator comes with BICV™ built in check valve.

Our AM7 circulator replaces Taco 007 and other model circulators.


Max GPM Flow: 11gpm

Max Head Feet: 8ft

Material: Stainless Steel

Connection Type: Union_Half

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ Stainless AM6 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer.


Max GPM Flow: 11gpm

Max Head Feet: 8ft

Material: Stainless Steel

Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union

Check Valve: Yes

Pump Speed: Single Speed

With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

Circulator comes with BICVbuilt in check valve.

Our AM6 circulator replaces Taco 006 models and other model circulators.

 


Max GPM Flow: 12gpm

Max Head Feet: 18ft

Material: Cast Iron

Connection Type: 4_Bolt_Flange

Pump Speed: Single Speed

AM8 Cast Iron 4 bolt Flange


Max GPM Flow: 11gpm

Max Head Feet: 18ft

Material: Cast Iron

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

AM8 Cast Iron 4 bolt Flange with built-in check valve


Max GPM Flow: 11gpm

Max Head Feet: 8ft

Material: Stainless Steel

Connection Type: Union_Three_Quarter: Union 3/4" Sweat

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ Stainless AM6 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer.


Max GPM Flow: 31gpm

Max Head Feet: 12ft

Material: Cast Iron

Connection Type: 4_Bolt_Flange

Pump Speed: Single Speed

AM10 Cast Iron 4 bolt Flange


Max GPM Flow: 20gpm

Max Head Feet: 11ft

Material: Stainless Steel

Connection Type: Flange, 2_Bolt_Flange

Pump Speed: Single Speed

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.

Our AM7 circulator replaces Taco 007 and other model circulators.


Max GPM Flow: 29gpm

Max Head Feet: 11ft

Material: Cast Iron

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

AM10 Cast Iron 4 bolt Flange with built-in check valve


Max GPM Flow: 17gpm

Max Head Feet: 21ft

Material: Cast Iron

Connection Type: Flange, 4_Bolt_Flange

Pump Speed: Three Speed

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

 


Max GPM Flow: 16gpm

Max Head Feet: 11ft

Material: Stainless Steel

Connection Type: Flange, 2_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.

Circulator comes with BICV™ built in check valve.

Our AM7-S circulator replaces Taco 007 and other model circulators.


Max GPM Flow: 16gpm

Max Head Feet: 20ft

Material: Cast Iron

Connection Type: Flange, 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Three Speed

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Circulator comes with BICV™ built in check valve.

The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.


Material: Stainless Steel

Connection Type: NPT

Pump Speed: Single Speed

AM7 Stainless with 3/4″ NPT 11×14 GPM


Max GPM Flow: 16gpm

Max Head Feet: 11ft

Material: Stainless Steel

Connection Type: NPT

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ AM7 Stainless 3/4″ NPT with line cord and timer.


Max GPM Flow: 18gpm

Max Head Feet: 11ft

Material: Stainless Steel

Connection Type: Union_Half

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ AM7 Stainless with 1/2″ Union Sweat Fittings, BICV, line cord and timer.


Max GPM Flow: 12gpm

Max Head Feet: 18ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Pump Speed: Single Speed

AM8 Stainless 4 bolt flange


Max GPM Flow: 18gpm

Max Head Feet: 11ft

Material: Stainless Steel

Connection Type: Union_Three_Quarter: Union 3/4" Sweat

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

Aqua-Ready™ AM7 Stainless with 3/4″ Union Sweat Fittings, BICV, line cord and timer.


Max GPM Flow: 11gpm

Max Head Feet: 18ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

AM8 Stainless 4 bolt flange with built-in check valve


Max GPM Flow: 31gpm

Max Head Feet: 12ft

Material: Cast Iron

Connection Type: Flange, 4_Bolt_Flange

Pump Speed: Three Speed

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

The AM10 circulator replaces Taco 0010 circulators and other circulator models.


Max GPM Flow: 29gpm

Max Head Feet: 12ft

Material: Cast Iron

Connection Type: Flange

Check Valve: Yes

Pump Speed: Three Speed

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Circulator comes with BICV™ built in check valve.

The AM10 circulator replaces Taco 0010 circulators and other circulator models.

 


Max GPM Flow: 29gpm

Max Head Feet: 11ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

AM10 Stainless 4 bolt flange with built-in check valve


Max GPM Flow: 31gpm

Max Head Feet: 12ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Pump Speed: Single Speed

AM10 Stainless 4 Bolt Flange


Max GPM Flow: 18gpm

Max Head Feet: 20ft

Material:

Connection Type: 2_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

The NEW AMRe-FVL High Efficiency ECM circulator  for heating with IRON GUARD™ is fully automatic, no buttons to push, steel circulator with stainless cartridge. Does not require iron filter in the system to protect the circulator. External iron filter cost as much as the pump. 6 1/2 ft. replaceable line cord included to save money an time on installation.
High performance of 20 ft. x 18 GPM, 120/1/60, low 45 watt draw, universal 2 bolt flange with nut retainer, built-in check valve, replaceable cartridge, a green sustainable product.

The AMRe replaces the Taco oo7 oo7e 0015 0015e 1816e 0018e, Grundfos 15-42, 15-58, Alpha I & II and others with one single model.


Max GPM Flow: 31gpm

Max Head Feet: 12ft

Material: Stainless Steel

Connection Type: Flange, 4_Bolt_Flange

Pump Speed: Three Speed

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

The AM10 circulator replaces Taco 0010 circulators and other circulator models.

 


Max GPM Flow: 29gpm

Max Head Feet: 11ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Three Speed

Corded: Yes

Aqua-Ready™ Stainless AM10 4 Bolt flanged 3 Speed with BICV, line cord and timer.


Max GPM Flow: 29gpm

Max Head Feet: 12ft

Material: Stainless Steel

Connection Type: Flange, 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Three Speed

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Circulator comes with BICV™ built in check valve.

The AM10 circulator replaces Taco 0010 circulators and other circulator models.

 


Max GPM Flow: 16gpm

Max Head Feet: 21ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

Stainless AMR Set on High Speed with Check Valve and Line Cord


Material: Cast Iron

Connection Type: Flange

Check Valve: Yes

Pump Speed: Single Speed

TwinTurbo Cast Iron or Stainless Steel: 2 AMR  or 2 AM10 Pumps wired together set on medium or high speed.

Benefits and features:

  • More competitively priced than Higher horsepower single pumps with similar performance
  • Two pumps in series doubles the pressure output of a single pump
  • Pre-wired in series, installation wiring is the same as a single unit
  • Duel pumps allow one to be operated alone or both together
  • On solar drain back systems, both pumps can be used to fill the system and one turned off during operation.
  • Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations
  • Available with or without built in Check Valve (add “V” to part number, i.e. AMR-FV3)
  • Available in Cast Iron and Stainless Steel Construction

AMR-F3, TwinTurbo Cast Iron, HeadFt:41 GPM:17
AMR-FV3, TwinTurbo Cast Iron with check valve, HeadFt:41 GPM:16

AMR-F2, TwinTurbo Cast Iron, HeadFt:36 GPM:14
AMR-FV2, TwinTurbo Cast Iron with check valve, HeadFt:36 GPM:13

AM10-F3, TwinTurbo Cast Iron HeadFt:24 GPM:29
AM10-FV3, TwinTurbo Cast Iron with check valve HeadFt:24 GPM:28

AM10-F2, TwinTurbo Cast Iron, HeadFt:21 GPM:24
AM10-FV2, TwinTurbo Cast Iron with check valve, HeadFt:21 GPM:23


Max GPM Flow: 16gpm

Max Head Feet: 20ft

Material: Stainless Steel

Connection Type: Flange, 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Three Speed

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Circulator comes with BICV™ built in check valve.

The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

 


Max GPM Flow: 17gpm

Max Head Feet: 21ft

Material: Stainless Steel

Connection Type: Flange, 4_Bolt_Flange

Pump Speed: Three Speed

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

 


Max GPM Flow: 16gpm

Max Head Feet: 21ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Three Speed

Corded: Yes

Aqua-Ready™ AMR Stainless 4 bolt flanged 3 Speed pump with BICV, line cord and timer.

 


Max GPM Flow: 20gpm

Max Head Feet: 20ft

Material: Cast Iron

Connection Type: Flange, 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Variable Speed

Corded: Yes

AM55-FVL Cast Iron Circulator has  an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. * Use an iron filter when installing circulator in existing systems to avoid problems with iron oxides.

Circulator comes with BICV™ built in check valve.

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

 

 


Max GPM Flow: 20gpm

Max Head Feet: 21ft

Material: Stainless Steel

Connection Type: Flange, 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Variable Speed

Corded: Yes

AM55-SFVL Stainless Steel Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. It has a universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Circulator comes with BICV™ built in check valve.

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

 


Material: Stainless Steel

Connection Type: Flange, 4_Bolt_Flange

Pump Speed: Single Speed

TwinTurbo Cast Iron or Stainless Steel: 2 AMR  or 2 AM10 Pumps wired together set on medium or high speed.

Benefits and features:

  • More competitively priced than Higher horsepower single pumps with similar performance
  • Two pumps in series doubles the pressure output of a single pump
  • Pre-wired in series, installation wiring is the same as a single unit
  • Duel pumps allow one to be operated alone or both together
  • On solar drain back systems, both pumps can be used to fill the system and one turned off during operation.
  • Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations
  • Available with or without built in Check Valve (add “V” to part number, i.e. AMR-SFV3)
  • Available in Cast Iron and Stainless Steel Construction

AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17
AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16

AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14
AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13

AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29
AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28

AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24
AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23


Check Valve: Yes

Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed  fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting. 1/2 hp and 3.3 Amps


Type of Hot Water Heater: Tank

Type of Household Plumbing: Single_Pipe

Max GPM Flow: 11gpm

Max Head Feet: 8ft

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AQUA-FLASH® Recirculation Kit for hot water tanks with single pipe: AMH1K-3UV

Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, 10 ft. line cord, bronze by-pass valve (with check valve), 2 ft. NSF hose & Tee

  • Delivers Instant Hot Water Comfort in a Flash to Every Tap on the same line. 
  • No electrical connection required under sink.
  • Ideal for pedestal sink installations
  • Built-in Mechanical Timer
  • New Video Here!

 

 


Aqua-Flash® AMK-UK Universal Kit  Bypass Valve, Hose and Tee For Hot Water Tanks and Indirect Heaters

The new AMK-UK brass and stainless valve kit with bi-metal coil provides 90° F hot water to every faucet. It does not require power under the sink

The AMK-UK has a unique advantage, it can handle larger pump pressures up to 21 ft. hd. and provide quiet operation. The kit includes valve, hose and tee and can be installed quickly onto the cold angle stop. A hot water circulator needs to be installed at the hot water tank.

Additional Under-sink bypass valve kits- up to 5 per pump. To be used with AMH1K-3UV AquaMotion , 70600 Nevercold, and FT1 APCOM.


Type of Hot Water Heater: Tankless Indoor

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems AM6 AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

New video here!


Type of Hot Water Heater: Tankless Indoor

Type of Household Plumbing: Single_Pipe

Max GPM Flow: 16gpm

Max Head Feet: 20ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AQUA-ON DEMAND™ for TANKLESS HEATER WITHOUT BUILT-IN PUMP WITH SINGLE PIPE FOR UP TO 600 FT. OF TOTAL PIPE LENGTH- (N) NO TIMER- INCLUDES AMK-WB ON DEMAND 
AMR-SFVL1 flanged stainless high speed circulator with 10 ft. line cord, ¾” stainless  Female NPT flange kit, AMK-WB On Demand Push Button with Receiver,  Includes the AMK-ODR valve kit with valve, hose, Tee. Valve maintains 95°F

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

Meets Title 24 California

 


Type of Hot Water Heater: Tankless Indoor

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Pump Speed: Single Speed

Corded: Yes

AQUA-ON DEMAND™ for TANKLESS HEATER (N) NO TIMER- USE WITH ON DEMAND CONTROL– For up to 100 Ft. of total pipe length and tankless minimum Flow Rate of .4 GPM or less
AM7-SUEV1L Stainless Union circulator, Built-In check valve, 1” union with ¾” extended tailpieces with flat for mounting,with 10 ft. line cord, includes the AMK-ODR valve kit with Bypass valve on/off 95°-104°F, hose, Tee. The ODR valve installs on the cold angle stop. AMK-WB On Demand Remote RF Wireless Control with Adjustable Receiver and Cord. -No Wiring Required, up to 5 AMK-WB or AMK-MS or AMK-WS or mixed per Receiver

Meets Title 24 California


 

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with a circulator to supply hot water ON DEMAND or Built-in Timer on pump. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called for using an On-Call control or Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. A Hot Water Circulator must be installed at the tankless.


Type of Hot Water Heater: Tank

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks


Type of Hot Water Heater: Tank

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AMH3K-7N is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks

  • Fully automatic system installs under sink
  • Requires electrical outlet at sink
  • No cutting of pipe
  • Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees)
  • Add On Demand Kit (5 Minute Run Timer) to turn On
  • Meets Title 24 California


Type of Hot Water Heater: Tankless Indoor

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Three Speed

Corded: Yes

AMH3K-R is designed for standard plumbing systems up to 600ft of total pipe length.

  • Fully automatic system installs under sink
  • Rubber mount
  • Requires electrical outlet at sink
  • Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees)
  • Built-in Mechanical Timer
  • Meets Title 24 California


Type of Hot Water Heater: Tankless Indoor

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Three Speed

Corded: Yes

AMH3K-RN is designed for standard plumbing systems with hot water pipe length up to 600ft of total pipe length.

  • Fully automatic system installs under sink
  • Rubber mount
  • Requires electrical outlet at sink
  • Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees)
  • Add On Demand Kit (5 Minute Run Time) To Turn On
  • Meets Title 24 California


Type of Hot Water Heater: Tank

Type of Household Plumbing: Dedicated_Return

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AMH2K-7 is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of total pipe length. 

  • Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5
  • Kits include 1 AM7-SUVA1LT1 pump, 10 foot cord, (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets
  • Built-in Mechanical Timer
  • Meets Title 24 California


Type of Hot Water Heater: Tank

Type of Household Plumbing: Dedicated_Return

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AMH2K-7N is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of pipe length. 

  • Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5
  • Kits include 1 AM7-SUVA1L1 pump, 10 foot cord,  (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets
  • Add On Demand (5 Minute Run time) to turn On.
  • Meets Title 24 California


Type of Hot Water Heater: Tankless Indoor

Type of Household Plumbing: Dedicated_Return

Material: Stainless Steel

Connection Type: Flange

Check Valve: Yes

Pump Speed: Three Speed

Corded: Yes

AMH2K-R is designed for dedicated return line systems with tankless water heater up to 600 feet of pipe length.

  • Installs near heat source on Return Line
  • Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees)
  • Built-in Mechanical Timer
  • Meets Title 24 California


Type of Hot Water Heater: Tankless Indoor

Type of Household Plumbing: Dedicated_Return

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Three Speed

Corded: Yes

AMH2K-RN is designed for dedicated return line systems with tankless water heater up to 600 feet of total pipe length.

  • Installs near heat source on Return Line
  • Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees)
  • Add On Demand Kit (5 Minute Run Time) to turn On
  • Meets Title 24 California


Type of Hot Water Heater: Tankless Outdoor

Type of Household Plumbing: Dedicated_Return

Max GPM Flow: 17gpm

Max Head Feet: 11ft

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AQUA-SHIELD™ AMH2K-7X -Dedicated Return Line

AMH2K-7X for  Outdoor tankless with less than .4 GPM flow requirement (union body)

  • Includes: AM7-SUV1AXLT1 and UK75T 3/4″ Threaded Male Fittings
  • For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line
  • Primary Market Southern Tier of the US
  • Outdoor installation saves on expensive air intake, exhausts
  • Easy to service outdoor installed pump
  • Pump freeze protected and water and sprinkler safe
  • Greater choice of tankless models
  • Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord
  • Clear cover with Timer visibility
  • Meets Title 24 California (only with Aquastat)

Aqua-Shield™ Pat. Pending


Type of Hot Water Heater: Tankless Outdoor

Type of Household Plumbing: Dedicated_Return

Max GPM Flow: 16gpm

Max Head Feet: 20ft

Material: Stainless Steel

Connection Type: 4_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AQUA-SHIELD™ AMH2K-RX- Dedicated Return Line Outdoor Recirculation Pump

AMH2K-RX for Outdoor tankless

  • Includes: AMR-SFV1AXLT1 (flanged body) and FK75S 3/4″ Stainless Flanges
  • For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line
  • Primary Market Southern Tier of the US
  • Outdoor installation saves on expensive air intake, exhausts
  • Easy to service outdoor installed pump
  • Pump freeze protected and water and sprinkler safe
  • Greater choice of tankless models
  • Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord
  • Clear cover with Timer visibility
  • Meets Title 24 California (only with Aquastat)

Aqua-Shield™ Pat. Pending


Type of Hot Water Heater: Tankless Outdoor

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AQUA-SHIELD™ AMH1K-7ODRXZT1- Single Pipe

Aqua-Shield™ Circulator for Outdoor Installation. Installs on Tankless Heater without built-in pump for Single Pipe Installation. For up to 250 ft. of total pipe length and tankless Flow requirement of .4 GPM or less

AM7-SU1LXZT1 Stainless Union Circulator with 3/4″ Male Tailpieces, with outdoor enclosure, water, sprinkler, bug, freeze protected, anti-tampering locking device tab, built-in timer, 10 ft. line cord, pump bypass connection, check, flow control, hose, bypass Tee 3/4″ FNPT x 3/4″ MNPT x 3/8″ OD Compression. AMK-ODR bypass valve kit: Bypass valve, hose, Tee. Valve maintains 95° F. Installs under sink on the cold angle stop and no power required under sink. Patented.

 


3/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


Type of Hot Water Heater: Tankless Outdoor

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Pump Speed: Single Speed

Corded: Yes

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, For up to 250 Ft. of total pipe length and tankless Flow requirement of .4 GPM or less, Stainless single speed circulator with union connections, 10 ft. line cord, with outdoor enclosure, water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95 F  degrees) installs under fixture, Includes AMK-WB On Demand- UK75T 3/4″ Threaded Male Fittings Included -Meets CA Title 24 with On Demand. Patent pending. Freeze protection does not work with this model because on the On Demand Kit.


Type of Hot Water Heater: Tankless Outdoor

Type of Household Plumbing: Single_Pipe

Material: Stainless Steel

Connection Type: 2_Bolt_Flange

Check Valve: Yes

Pump Speed: Single Speed

Corded: Yes

AQUA-SHIELD™ AMH1K-RODRXT1 Single Pipe with On Demand

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, USE WITH ON DEMAND- For up to 600 Ft. of total pipe length and tankless for all minimum flow rates. Stainless high speed circulator, flanged, 10 ft. line cord, with outdoor enclosure, for water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95F degrees) installs under fixture, Includes AMK-WB ON DEMAND-FK75S 3/4″ Stainless Flanges Included. Patent pending. – . Meets CA Title 24 with On Demand. Freeze protection does not work with this model because of the On Demand Kit.

Aqua-Shield Outdoor Tankless Single Pipe for up to 600 ft. of total pipe with On Demand


1″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


1-1/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


1-1/2″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


On-Demand Wireless Control Kit – Wireless Button and Receiver

(Button available separately AMK-WBR)


3/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


On-Demand Wireless Control- Push Button Only 

This is an extra control for the AMK-WB Kit


1″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


On-Demand Wireless Control Kit – Motion Sensor and Receiver

(Motion Sensor available separately AMK-MSR)


1-1/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


On-Demand Wireless Control- Motion Sensor Only 

This is an extra control for the AMK-MS Kit


1-1/2″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets.

  • Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench
  • Fits AquaMotion models AM5, AM7, AMR, AM10


3/4″ Sweat Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel

Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.

  • Forged brass body full port for water application
  • 600 PSI Non-Shock WOG
  • Allows draining of the non-pressure side of the valve when closed


On-Demand Wireless Control Kit – Wall Switch and Receiver

(Switch available separately AM-WSR)


On-Demand Wireless Control- Wall Switch Only 

This is an extra control for the AMK-WS Kit


1″ Sweat Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel

Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.

  • Forged brass body full port for water application
  • 600 PSI Non-Shock WOG
  • Allows draining of the non-pressure side of the valve when closed


On-Demand Air Actuated Counter Control Kit – Wireless Button and Receiver

(Button available separately AMK-CBW)

For use with the AMH3K-7, AMH3K-7N, AMH3K-R & AMH3K-RN Under sink recirculation kits.


1-1/4″ Sweat Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel

Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.

  • Forged brass body full port for water application
  • 600 PSI Non-Shock WOG
  • Allows draining of the non-pressure side of the valve when closed


3/4″ NPT Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel

Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.

  • Forged brass body full port for water application
  • 600 PSI Non-Shock WOG
  • Allows draining of the non-pressure side of the valve when closed


Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged


1″ NPT Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel

Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.

  • Forged brass body full port for water application
  • 600 PSI Non-Shock WOG
  • Allows draining of the non-pressure side of the valve when closed


1-1/4″ NPT Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel

Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets.

  • Forged brass body full port for water application
  • 600 PSI Non-Shock WOG
  • Allows draining of the non-pressure side of the valve when closed


CT03     Replacement Cartridge for AM3 Circulators

(O-Ring and 4 replacement bolts included)


Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost


Replacement Cartridge for the AM10 3 speed circulator


Replacement Cartridge for AM5 and AM6 Circulators


Replacement Cartridge for the AMR 3 speed circulator


Connection Type: Union_Half, Union

Two Unions with two 1/2″ Sweat Tail Pieces, Gaskets


Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union

 

Two Unions with two  3/4″ Sweat Tail Pieces, Gaskets