Cast Iron Circulators

AM7-FV1Submittal Data Sheet | Circulator Brochure  |                 | Single and Three Speed Instruction Sheets |

AquaMotion’s Cast Iron Circulators has been designed for Residential and commercial systems such as:

  • Hydronic heating systems (Hot water heating)
  • Radiant floor and panel heating
  • Heat recovery systems
  • Chilled water cooling systems

*Also applies to Water Source heat pump systems and Solar heating applications. In case of doubt, please call factory.

AquaMotion designed the AM7, a super quiet, single stage, in-line, maintenance-free, wet motor circulator for Hydronic Heating Systems, Radiant Heating, Hydro-Air Fan Coils, Chilled Water Cooling and Domestic Water Systems. AM7’s are made in Cast Iron and Bronze and Stainless Steel construction. The AM7 covers most circulator applications. Our flat performance curve design assures quiet operation in heating systems and features lowest operating costs. Our AM7 circulator replaces Grundfos model UPS 15-58, Taco 007, and Armstrong Astro 30 and other models.

AM10-3F1AquaMotion designed the rugged 3 speed AM10 Circulator to extend the range of the AquaMotion pump offering and as the Replacement Pump for all Service Calls.

It has the performance rating to replace all circulators up to 26 GPM and uses on average, 28% less power than competitor’s circulators of the same performance, saving the customer a bundle every year. The 4 bolt flange for mounting in-line or 90° rotated makes the AM10 the Perfect Replacement Service Pump. BICV, Built-In Check Valves are optional. Circulators are available in Cast Iron and Stainless Steel.

AquaMotion designed the AM5, a super quiet, single stage, in-line, maintenance-free, wet rotor circulator for Hydronic Heating Systems, Radiant Heating, Indirect Water Heating, Hydro-Air Fan Coils, Chilled Water Cooling and Domestic Water systems. AM5’s are made in Cast Iron and Bronze and Stainless Steel construction.

AquaMotion designed the Model AMR, 3 Speed Cartridge Circulator for applications requiring high head such as Radiant Heating. The 3 speed design allows pump performance to be adjusted to more closely match system requirement

Our AMR circulator replaces Grundfos UPS 15-58, Taco 00R, 0015 and Wilo STAR S21 and other models. To reduce inventory and cost, we designed this circulator with a 4 bolt flange for mounting in-line or 90° rotated. AMR’s are available with BICV, Built-In Check Valves, in Cast Iron and Stainless Steel.

All pumps are available with a line cord. Add “L” to the end of the product number for the line cord version. 

AquaMotion TwinTurboTM Series

High Capacity Single Speed PSC Circulators

| Instruction Sheet | Submittal Data Sheet |

TwinTurbo

AquaMotion designed the new TwinTurboTM Series for residential and commercial applications. The TwinTurboTM series consists of two AMR or two AM10 circulators, pre-wired, set on medium or high speed, installed in series doubling the performance output of a single circulator. Model number AMR-F2 matches the performance ranges of the Taco 009/0011 and the Grundfos UP15-100. Model number AM10-F3 matches the performances ranges of the Taco 0014, Grundfos UP26-64 & UP26-96, B&G PL30, and the Armstrong Astro 210 and Astro 250.

Benefits and features:

  • More competitively priced than Higher horsepower single pumps with similar performance
  • Two pumps in series doubles the pressure output of a single pump
  • Pre-wired in series, installation wiring is the same as a single unit
  • Duel pumps allow one to be operated alone or both together
  • On solar drain back systems, both pumps can be used to fill the system and one turned off during operation.
  • Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations
  • Available with or without built in Check Valve (add “V” to part number, i.e. AMR-FV3)
  • Available in Cast Iron and Stainless Steel Construction
Product Number Product Description Performance Range   Head ft/GPM
AMR-F3 TwinTurbo Cast Iron  41×17
AMR-FV3 TwinTurbo Cast Iron with check valve  41×16
AMR-SF3 TwinTurbo Stainless Steel  41×17
AMR-SFV3 TwinTurbo Stainless Steel with check valve  41×16
AMR-F2 TwinTurbo Cast Iron  36×14
AMR-FV2 TwinTurbo Cast Iron with check valve  36×13
AMR-SF2 TwinTurbo Stainless Steel  36×14
AMR-SFV2 TwinTurbo Stainless Steel with check valve  36×13
 
AM10-F3 TwinTurbo Cast Iron  24×29
AM10-FV3 TwinTurbo Cast Iron with check valve  24×28
AM10-SF3 TwinTurbo Stainless Steel  24×29
AM10-SFV3 TwinTurbo Stainless Steel with check valve  24×28
AM10-F2 TwinTurbo Cast Iron  21×24
AM10-FV2 TwinTurbo Cast Iron with check valve  21×23
AM10-SF2 TwinTurbo Stainless Steel  21×24
AM10-SFV2 TwinTurbo Stainless Steel with check valve  21×23